Festo Промежуточная позиция для линейного модуля DGC - Manual (Page 19)

SLG−Z−...
Festo SLG−Z−... 0512a English
19
3 Conditions of use
Please note
Incorrect handling can lead to malfunctioning.
S Make sure that the requirements in this chapter are always observed.
The product will then function correctly and safely.
S Compare the maximum values in these operating instructions with your actual
application (e.g. pressures, impact forces, impact energy, torques, temperaĆ
tures).
The product can only be operated in accordance with the relevant safety guideĆ
lines if the maximum loading limits are observed.
S Make sure there is a supply of correctly
prepared compressed air.
S Please observe the regulations applicable
to the place of use and comply with
national and local regulations.
S Remove the packing.
The packaging is intended for recycling
(except for oiled paper which must be
disposed of ).
S Take into account the prevailing ambient
conditions.
S Please operate the SLG−Z−... in a clean
environment.
If dirt is not removed, the lever may only
swivel with difficulty.
S Slowly pressurize the complete system.
To do this use start−up valve type HEL−... .
S Use the product in its original state. UnĆ
authorized modification is not permitted.
Fig. 4
LF−... LR−...
Fig. 5
[°C] [%] [mbar]
Fig. 6