Festo Линейный привод с датчиком перемещения DGPIL - Manual (Page 26)

DGPI(L)−...−AI F
Festo DGPI(L)−...−AIF 0409a English
26
Fastening the work load
1. Select a fastening method:
DGPIL−... DGPI−...
1. Sliding blocks NSTL−... on slide 4
2. Threaded holes and centring elements
(see Accessories") on the slide
3. Holes 6 and threads 7
in the
driver 8
Fig. 10: Methods of fastening the work load (see Fig. 1)
Dimensions of the sliding blocks NSTL−... [mm]
j 25 32 40 50 63
L 100 128 166 199 229
A 13 14 25 24 30
B 15 15 20 20 35
M M5 M5 M5 M8 M8
Fig. 11
If fastening method 2 is used, the screws
must be shorter than the threaded hole.
2. Place the work load so that the tilting
torque of force F parallel to the movement
axis and lever arm a" remains low.
Work loads with their own guide:
S Adjust the guides of the work load and the DGPI(L) so that they are exactly
parallel.
Fig. 12
Fig. 13
a
F