Festo Линейные приводы DGO, дюймовые - Manual (Page 29)

DGO−...−A−B
Festo DGO−...−A−B 0410b English
29
11 Accessories
Accessories Type
Driver for compensating for misalignments and
for avoiding tilting torques (for dia. 16...40) FKG−...
Foot fastening (for dia. 12...25)
Flange fastening (for dia. 12...25)
Flange fastening (for dia. 32, 40) HBN−...
FBN−...
FV−...
Proximity switch SMEO−1−... / SMTO−1−... / SMPO−1−...
Fastening kit for proximity switches
Sockets for proximity switches SMB−1
SIM−M8−...
One−way flow control valve
Non−return valve with control GRLA−...
HGL−...
Screw connector QS−...
Lubricating grease see chapter 9
12 Eliminating faults
Fault Possible cause Remedy
Uneven
movement of
the slide One−way flow control valve not
fitted correctly If possible restrict exhaust
the slide
Lubrication missing Lubricate
Cylinder barrel dirty Clean, provide a cover
Cylinder barrel damaged Consult Festo after−sales service
Slide does not
come into
stroke end Adjusting screw of end position
cushioning completely closed Open adjusting screw
stroke end
position
Magnetic coupling is interrupted Press the external slide into the
end position until the internal
slide couples in again against the
magnetic repelling force