Festo Контроллер крайних положений SPC11 - Manual (Page 19)

1. Summary of components
1−7
Festo P.BE−SPC11−DSMI−EN en 0910b
Compressed air tubing and screw connectors ( 4Ă)
See system manual type P.BE−SPC11−SYS...
S Arrange the tubing between the proportional directional
control valve (MPYE−5−...) and the drive (DSMI−...) symĆ
metrically.
Recommendation: Tubing length = max. 300 mm
S Cut the tubing and the connectors to the required length
as shown in the following table.
Horizontal fitting position
Type Valve type MPYE−... Screw connectors for Tubing type PUN
MPYE−... DSMI−...
DSMI−...
DSMI−25−... MPYE−5−M5−010B QSM−M5−6 QSM−M5−6 PUN−6x1
DSMI−40−... MPYE−5−1/8−LF−010B QS−1/8−8 QS−1/8−8 PUN−8x1.25
DSMI−63−... MPYE−5−1/8−LF−010B QS−1/8−8 QS−1/4−8 PUN−8x1,25