Festo Контроллер крайних положений SPC11 - Manual (Page 11)

Contents and general instructions
IX Festo P.BE-SPC11-DNCI-EN en 1208a English
Product-specific terms and abbreviations
The following product-specific abbreviations are used in this
manual:
Term /
abbreviation Meaning
0-signal Input or output supplies 0 V
1-signal Input or output supplies 24 V
Amplification stage The amplification stage influences the acceleration behaviour of the drive, for
example. The amplification stage should usually be set as specified in the
“Drive-specific supplement” manual. If the positioning behaviour is later
optimised, only the cushioning stage should be modified.
Cushioning stage The positioning behaviour is determined by the amplification and cushioning
stages. The cushioning stage serves to optimise the approach behaviour when
moving to the end positions.
Drive The term drive is used in this manual for the linear unit (DDLI, DGCI,
DGP(I)(L)-...), cylinder (DDPC, DNC-...) or rotary drive (DSMI).
I Digital input
O Digital output
Parameters Parameters which must be set in order that the system can be operated. The
amplification stage, the cushioning stage and the system parameter belong
here.
PLC/IPC Programmable logic controller/industrial PC
System parameters Characteristic value which describes the system structure, the features and
components of the drive used.
Teach procedure During the teach procedure the SPC11 checks the set parameters, learns the
position of the mechanical fixed stops as well as various characteristic system
values and saves them in the integrated EEPROM.