APC Command Line Interface - Manual (Page 24)

Command Reference: Outlet Commands
20 Command Line Interface (CLI) User’s Guide
reboot
Syntax:
all
reboot outlet|range[,outlet|range...]
Description: Remove and then restore power to
one or more outlets. The CLI does not wait for the
reboot command to complete before providing
output and re-displaying the CLI prompt (APC> ).
If you specify more than one outlet, the outlets will
turn off and on approximately at the same time.
However, for close synchronization, outlets must
be configured as part of a synchronized outlet
group.
Parameters:
Example:
reboot 1,5-7
Output Format (for the preceding example):
OK
1: Database Server: Outlet rebooting.
5: Disk Array PS 1: Outlet rebooting.
6: Disk Array PS 2: Outlet rebooting.
7: Disk Array PS 3: Outlet rebooting.
Example:
reboot “Web Server”
Output Format (for the preceding example):
OK
2: Web Server: Outlet rebooting.
3: Web Server: Outlet rebooting.
Error Messages: E101, E104
all The value all removes and then restores power
to all outlets of the Switched Rack PDU. This
value is not case-sensitive.
outlet An outlet name or number. If you specify a
name that contains a Space character, you
must enclose the name in quotation marks
range A range of outlet numbers, with a hyphen
separating the starting number from the
ending number.