APC Command Line Interface - Manual (Page 28)

Command Reference: Switched Rack PDU Commands
24 Command Line Interface (CLI) User’s Guide
list
Syntax:
list
Description: When the administrator or device
manager (device-only user) uses the command:
• If the current user was authenticated by
RADIUS, the output lists all RADIUS-defined
users, all users in the local database, and the
outlets assigned to each through RADIUS.
• If the current user was not authenticated by
RADIUS, the output lists only the users in the
local database and the outlet numbers assigned
to each through the CLI or the Switched Rack
PDU user interface.
When the current user is an outlet user, the output
lists only that user and the user’s assigned outlets,
defined by the method that authenticated that user.
Access: Administrator, device manager, and
outlet user.
Parameters: None.
Output Format:
OK
user: outlet_number, outlet_number...
Output Examples:
In the following example, the current user (the
administrator) and the outlet user were
authenticated through the local database.
OK
Local: admin: 1,2,3,4,5,6,7,8
Local: carlos_sanchez: 1,5,6,7
In the following example, the current user (an
outlet user) was authenticated through the local
database.
OK
Local: carlos_sanchez: 1,5,6,7
In the following example, the current user (an
outlet user) was authenticated through RADIUS.
OK
Radius: VSAOutlet: 1,2,3
In the following example, the current user (the
device manager) was authenticated through
RADIUS, and the outlet user was authenticated
through the local database.
OK
Local: device: 1,2,3,4,5,6,7,8
Radius: RadDevice: 1,2,3,4,5,6,7,8
Local: ingrid_kohl: 1,5,6,7
Error Message: E101