Kramer Electronics TP-124 - Manual (Page 11)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your TP-105/TP-105(HD) CAT 5 Line Driver/DA
8
5 Your TP-105/TP-105(HD) CAT 5 Line Driver/DA
The TP-105 1
In particular, the TP-105:
receives a CAT 5 input, and distributes it to two identical
outputs.
• Has a transmission range of more than 300ft (more than 100m)
over UTP cabling
• Includes EQ. and level controls and is 12V DC fed
Figure 4 and Table 3 define the TP-105:
Figure 4: TP-105 CAT 5 Line Driver/DA
Table 3: TP-105 CAT 5 Line Driver/DA Features
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 OUT 2 RJ-45 connector Connects to 2
3
the LINE IN RJ-45 connector on the TP-120 XGA
Line Receiver
OUT 1 RJ-45 connector Connects to 2 the LINE IN RJ-45 connector on the TP-120 XGA
Line Receiver
4 INPUT RJ-45 connector Connects to 2 the LINE OUT RJ-45 connector on the PT-110 XGA
Line Transmitter
5 EQ. trimmer Adjusts the video EQ. (equalization) compensation
6 LEVEL trimmer Adjusts 3
7
the video signal level
ON LED Illuminates when receiving power
1 The TP-105HD (identified by a sticker on its underside) is identical in appearance to the TP-105. However, the TP-105HD
can also receive HD signals (high definition resolutions: 480p, 576p, 720p, 1080i and 1080p), for example, from a TP-112HD
XGA/HD Line Transmitter-DA, and not only computer graphics signals (for example, from a PT-110 as
Figure 18 illustrates)
2 Using a UTP CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 12 and Figure 14 )
3 Insert a screwdriver into the hole and carefully rotate it, to trim the level