Kramer Electronics TP-124 - Manual (Page 14)

Your TP-121/TP-122
11
11
In addition, the TP-122:
•
Can power or be powered by the transmitter over the same CAT 5
cable
• Can change the polarity of decoding H and V Sync for video
• Includes EQ. and level controls
• Is 12V DC fed
Figure 7 and Table 6 define the TP-122 XGA/Audio Line Receiver topside:
Figure 7: TP-122 XGA/Audio Line Receiver (Topside)
Table 6: TP-122 XGA/Audio Line Receiver (Topside) Features
# Feature Function
1 12V DC +12V DC connector for powering the unit
2
AUDIO
OUT
S/PDIF RCA connector Connects to the digital audio acceptor
3 ANALOG 3.5mm mini
jack
Connects to the analog audio acceptor
4 LINE IN RJ-45 connector Connects to 1 the TP-121 or the TP-104 2
5 XGA OUT 15-pin HD (F) connector Connects to the XGA acceptor
6 LINK LED Illuminates when receiving the correct input signal
7 LEVEL trimmer Adjusts 4 the output signal level
8 EQ. 3 Adjusts trimmer 4
9
the cable compensation equalization level
ON LED Illuminates when receiving power
1 Using a UTP CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 12 and Figure 14 )
2 The TP-104 does not accept the audio signals
3 Degradation and VGA/XGA signal loss can result from using long cables (due to stray capacitance), sometimes leading to a
total loss of sharpness in high-resolution signals
4 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level