Kramer Electronics TP-124 - Manual (Page 18)

Your TP-123/TP-124
15
15
7.2 Your TP-124 XGA/Audio/Data Line Receiver
The TP-124 is a high-performance receiver obtaining the computer graphics
signal/audio/control data from the Kramer TP-123 via UTP cabling at its
CAT 5 Line input. The TP-124 outputs a computer graphics signal, an
unbalanced stereo analog audio signal, a converted digital audio (S/PDIF)
signal and RS-232 control commands. The unidirectional (TxD) RS-232
interface makes it possible to control virtually any devices over a
transmission range of more than 300ft (more than 100m) over UTP cabling.
The TP-124 can power or be powered by the TP-123 transmitter over the
same CAT 5 cable.
In addition, the TP-124 features:
•
Level and EQ. control for the XGA signals
• The capability to change the polarity of decoding H and V Sync
• 24 bit 48kHz S/PDIF digital audio that supplies the highest quality
audio
• Is 12V DC fed
This section describes the topside of the TP-124 XGA/Audio/Data Line
Receiver. The underside 1 6.2.2 of the TP-124 is described in section .
Figure 11 and Table 10 define the topside of the TP-124 XGA/Audio/Data
Line Receiver:
Figure 11: TP-124 XGA/Audio/Data Line Receiver (Topside)
1 The underside is identical on the TP-124 and TP-122