Kramer Electronics VP-774AMP - Manual (Page 41)

36 VP-774AMP - The OSD Menu
6.7 The Scale Menu
Figure 28: Scale Menu
Setting Function
Aspect
Ratio Set (see Section 6.7.1 ) to:
Follow Input – If the input resolution ≤ output resolution, display with a blank
border.
input > output is denied and the aspect ratio automatically changes to Follow
Output
M
Follow Output – If the input resolution ≤ output resolution, scale up the picture.
If the input resolution ≥ output resolution, scale down the picture M
Best Fit – the best possible compromise between the input and the output
aspect ratios M
Letterbox – to compress the top and bottom edges of the input signal, but fill
the width of the screen M
Applies to the Single Window display mode only
Overscan Set the overscan (per window) to Off, 5% or 10% M / P
Output Set the:
Output Resolution
– to Native, 640x480@60, 640x480@75, 800x600@50,
800x600@60, 800x600@75, 1024x768@50, 1024x768@60, 1024x768@75,
1280x768@50, 1280x768@60, 1280x800@60, 1280x1024@50,
1280x1024@60, 1280x1024@75, 1360x768@60, 1366x768@50,
1366x768@60, 1400x1050@50, 1400x1050@60, 1600x900@60,
1600x1200@50, 1600x1200@60, 1680x1050@60, 1920x1200@60, 480i60,
480p60, 576i50, 576p50, 720p50, 720p59.94, 720p60, 1080p23.976, 1080p24,
1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60, 2K50 or
2K60
E
Note that any change in the output resolution may cancel the zoom
setting and window customization.
Master Connection – to HDMI1, HDMI2, HDBT or SDI to determine the
machine’s behavior (see Section 6.7.2 ) E
If the native resolution is not supported by the selected Master Connection, the
system searches for the best supported resolution. If the search fails (for example, if
the master connection is disconnected or EDID is unreadable), the resolution will
default to XGA.
i