Kramer Electronics VP-774AMP - Manual (Page 59)

54 VP-774AMP - Controlling the VP-774AMP
8.3.3.2 Connecting the ETHERNET Port via a Network Hub (Straight-
Through Cable)
You can connect the Ethernet port of the VP-774AMP to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45 connectors.
8.3.3.3 Ethernet Port Configuration and Control
Use the Kramer K-UPLOAD software to configure the VP-774AMP and the Web
pages to control it via the Ethernet.
The latest version of K-UPLOAD and installation instructions can be
downloaded from the Kramer Web site at
http://www.kramerelectronics.com/support/product_downloads.asp
i