Kramer Electronics VP-774AMP - Manual (Page 56)

VP-774AMP - Controlling the VP-774AMP 51
51
8.3 Controlling via the VP-774AMP Web Pages
You can remotely operate the VP-774AMP using a Web browser via the Ethernet
connection (see Section 8.3.3 ). To be able to do so, you must use a supported
Web browser:
For Windows 7:

Chrome version 25

Internet Explorer version 9

Firefox version 15
For Mac:

Chrome version 25

Safari 6

Firefox version 20
8.3.1 Connecting to the VP-774AMP via your Browser
Note that if the Protocol is set to Legacy (via the Miscellaneous menu,
see
Section 6.8 ), the Web pages may not function properly.
Make sure that your PC is connected via a network to the VP-774AMP and do the
following:
1. Open your Internet browser.
2. Enter the unit’s IP number or name in the Address bar of your browser.
If you are using DHCP, you have to enter the name.
The default IP number is 192.168.1.39, and may be changed by the system
integrator
Figure 33: Entering the IP Number in the Address Bar
You can now control the machine via the Web page.
i