Kramer Electronics VS-44HD - Manual (Page 13)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting Your VS-44HD
10
Figure 3: Connecting the VS-44HD as a Dual-Link 2x2 SD/HD-SDI Matrix Switcher
6.3 Setting the VS-44HD to work in the Dual-Link Mode
You can set the VS-44HD to work in the dual-link mode as follows:
To switch to the dual-link mode, press and hold the OFF front panel button for
3 seconds until a red dot illuminates on the display (on the second segment of the
7-segment display) and the OFF button blinks
To exit the dual-link mode, press and hold the OFF front panel button for 3
seconds until the red dot on the display disappears and the OFF button blinks.