Kramer Electronics VS-44HD User Manual
Page 22
![background image](/manuals/465090/22/background.png)
Operating the VS-44HD
19
2. Press the TAKE button to confirm the action.
The 7-segment Display no longer blinks. The TAKE button illuminates.
To confirm several actions (in CONFIRM mode), do the following:
1. Press each OUT-IN combination in sequence.
The 7-segment Display blinks.
2. Press the TAKE button to confirm all the actions.
The 7-segment Display no longer blinks. The TAKE button illuminates.
7.4 Storing/Recalling Input/Output Configurations
You can store and recall up to eight setup configurations using the four
INPUT buttons and the four OUTPUT buttons.
7.4.1
Storing an Input/Output Configuration
To store the current status in memory, do the following:
1. Press the STO button.
The STO button illuminates.
2. Press one of the 8 INPUT / OUTPUT buttons (this will be the setup # in
which the current status is stored).
The selected INPUT / OUTPUT button illuminates in blue. The memory
stores the data at that reference.
7.4.2
Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1. Press the RCL button.
The RCL button illuminates.
2. Press the appropriate INPUT / OUTPUT button (the button #
corresponding to the setup #). That setup configuration will blink in the
7-segment Display.
The memory recalls the stored data from that reference.
After pressing the same memory location the second time, the settings
will take effect.