Kramer Electronics VS-88HC - Manual (Page 18)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VS-88HC
14
6.2.1 Digital Audio Input Output Switching
In the example illustrated in Figure 5, the S/PDIF INPUT 1 source is
switched to the S/PDIF OUTPUT 2 1 , the S/PDIF INPUT 7 is switched to
OUTPUT 8, and INPUT 8 is not connected.
OUTPUT 2
OUTPUT 7
OUTPUT 8
OUTPUT 1
S/PDIF
S/PDIF
S/PDIF
TOSLINK TOSLINK
S/PDIF
S/PDIF
INPUT 2
INPUT 7
INPUT 8
INPUT 1
The button is
not illuminated
The button is
illuminated
INPUT 2
S/PDIF
S/PDIF
Figure 5: Connecting the VS-88HC Digital Audio Signals
The INPUT 2 digital audio signal (switched to OUTPUT 7) can be routed
either via the INPUT 2 S/PDIF connector or the IN OPTICAL AUDIO
connector, depending on the setup of the INPUT 2 button. To select the:
S/PDIF connector, press the button gently and make sure it does not
illuminate
TOSlink connector, press the INPUT 2 button for over 2 seconds; the
button illuminates and the signal is routed via the TOSlink connector
1 The digital audio signal on channel 2 is outputted simultaneously to the S/PDIF and the TOSLINK OUTPUT 2 connectors