Kramer Electronics VS-88HC - Manual (Page 26)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VS-88HC
22
8.2 Choosing the Audio-Follow-Video or Breakaway Option
You can switch the digital audio (S/PDIF) signals and the analog audio
signals in one of two ways, either:
Audio-follow-video (AFV), in which all operations and status indicators
relate to both the video and the audio channels 1 ; or
Breakaway, in which video and audio channels switch independently
8.2.1 Setting the Audio-Follow-Video Option
To set the audio-follow-video (AFV) option:
1. Press the AFV button.
The AFV button illuminates. The audio will follow the video 2 .
2. Press the TAKE button to confirm the modification (reconfiguring
the audio according to the video).
8.2.2 Setting the Breakaway Option
To set the breakaway option, press either the AUDIO (for audio control only)
or the VIDEO (for video control only) button:
If the AUDIO button illuminates, all switching operations relate to the
audio section.
If the VIDEO button illuminates, all switching operations relate to the
video section
8.3 Switching OUT-IN Combinations
To switch a video/audio input to a video/audio output, do the following:
1. Press an OUTPUT button (from 1 to 8 or ALL).
The corresponding 7-segment display blinks.
2. Press an INPUT button (from 1 to 8 or OFF).
The selected input switches to the selected output.
For example, press the ALL button and then the INPUT button # 3 to connect
input # 3 to all the outputs.
1 Audio and video connections are the same
2 If the audio input-output status does not correspond to the video input-output status, the 7-segment display shows the audio
status, the audio button illuminates and the take button blinks. The machine enters the Confirm mode