Kramer Electronics VS-88HC User Manual
Page 24
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Controlling the VS-88HC
20
6. Select Use the following IP address, and fill in the details as shown in
Figure 10.
7. Click
OK.
Figure 10: Internet Protocol (TCP/IP) Properties Window
7.3.2
Connecting the ETHERNET Port via a Network Hub (Straight-
Through Cable)
You can connect the Ethernet port of the
VS-88HC to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45
connectors.
7.3.3
Configuring the Ethernet Port
After connecting the Ethernet port, you have to install and configure it. For
detailed instructions on how to install and configure your Ethernet port, see
the “Ethernet Configuration (FC-11) guide.pdf” on our Web site:
http://www.kramerelectronics.com