WIKA IUT-11 - Manual (Page 42)

Universal IS Pressure Transmitter UniTrans
Operation of Devices without Displays
22
669
39
.0
5 D
/G
B
06
/2
00
6
Subject to change due to technical modifications. © Copyright WIKA Alexander Wiegand GmbH & Co. KG / Germany
WIKA Alexander Wiegand GmbH & Co. KG · Alexander-Wiegand-Str. · 63911 Klingenberg · (09372) 132 - 710 · Fax - 706 · E-mail: [email protected] · www.wika.de
117
8.6 Reset to Default
All default data settings are restored by simultaneously pressing the "zero", "esc" and
the "ok" buttons for 2 seconds (see chapter 9.4)
Calibrated special measurement ranges i. e. 4 bar on a 6 bar transmit-
ter can be adjusted by factory pre-setting. A reset to default will reset
the sensor back to its nominal range (i. e. 6 bar). The factory pre-setting
gets lost.
Reset to default
050-DS-GB
Calibration Value Function
(2 sec.) (2 sec.)
(2 sec.)
Important