WIKA IUT-11 - Manual (Page 67)

22
669
39
.0
5 D
/G
B
06
/2
00
6
Universal IS Pressure Transmitter UniTrans
Transmitter Operation with HART®-functionality
Subject to change due to technical modifications. © Copyright WIKA Alexander Wiegand GmbH & Co. KG / Germany
WIKA Alexander Wiegand GmbH & Co. KG · Alexander-Wiegand-Str. · 63911 Klingenberg · (09372) 132 - 710 · Fax - 706 · E-mail: [email protected] · www.wika.de
142
Timer:
• Hrs-TOTAL:
display of overall operating hours
• Hrs-CALIB: display of operating hours since last calibration
• Hrs-RESET: display of operating hours since last reset
• Hrs-SENSOR: display of sensor operating hours
Reset:
Via the four buttons certain functions of the transmitter are reset.
• Timer:
Reset of operating hours
• Alarm 4 - 20 mA: Alarm reset when the 4 ... 20 mA-limit has been exceeded
• MIN/MAX values: Reset of MIN/MAX-values in the display
• Reset all: Reset of all settable values to factory settings
(see also chapter 9.4)
Calibrated special measuring ranges i. e. 4 bar together with a 6 bar
transmitter can be adjusted by factory pre-setting. A reset to default will
reset the sensor to its nominal range (i. e. 6 bar). The factory pre-setting
gets lost.
Important