WIKA CPG2500 - Manual (Page 42)

42 Mensor/WIKA Operating Instructions Series CPG 2500
Digital Pressure Gauge
SERIES CPG 2500
PEAKMAX? <sp>n.nnnnne+nn<cr><lf> Returns the maximum pressure since
peakreset was sent.
PEAKMIN? <sp>n.nnnnne+nn<cr><lf> Returns the minimum pressure since
peakreset was sent.
PEAKRESET none Resets the peak values.
PORT nnnnnn Sets the Ethernet port of the instrument.
PORT? <sp>nnnnn<cr><lf> Returns the Ethernet port of the instru-
ment.
PTYPE Absolute, Gauge or
Differential Sets the instrument pressure type - only
works if the optional barometric sensor is
installed.
PTYPE? <sp>CCCCC<cr><lf> Returns “Absolute” or “Gauge” for the
pressure type.
RANGEMAX? <sp>XXXXXXX<cr><lf> Returns the maximum range of the active
transducer in the current units.
RANGEMIN? <sp>XXXXXXX<cr><lf> Returns the minimum range of the active
transducer in the current units.
RATE? <sp>XXXXXXX<cr><lf> Returns the rate reading of the instrument
in current units/second.
RDECPT? <sp>n<cr><lf> Returns the number of rate decimal points
for the active channel. (see RESOLUTION)
RELEASE? 15 char string
Example:
Release? Test_stand_1
Returns: <sp>(yes or no),
CCC…CCC<cr><lf> This command is used to release control
of the instrument in a multiple computer
environment. Yes if release is successful.
No if instrument is being controlled with
another computer. CCC… = name of con-
trolling computer or AVAILABLE.
See: ACQUIRE? and UNLOCK
RESOLUTION n Sets the number of significant digits.
See DECPT?
RESOLUTION? <sp>n<cr><lf> Returns the number of significant digits.
See DECPT?
RFILTER value in % Sets the % of the rate filter.
RFILTER? <sp>n.nnnnne+nn<cr><lf> Returns the rate filter.
RWINDOW value in current units Sets rate exponential filter window.