Cirrus Logic CS4207 - Manual (Page 89)

DS880F4 89
CS4207
Response Format:
6.9.8 Unsolicited Response Control
Get Parameter Command Format:
Set Parameter Command Format:
Response Format:
Bits [31:0] are sticky and will not be reset by a Link Reset or a Function Group Reset:
Unsolicited Response Format:
Bits Type Default Description
31:8 Read Only 000000h Reserved
7 Read Only 0b
H-Phone Enable (HPE): Set to ‘0’ since there is
no low impedance amplifier associated with this
pin widget.
6 Read/Write 0b
Output Enable (OUTE): This bit has no effect on
the output path. Per HD Audio spec, a ‘1’
enables the output path of the Pin Widget. When
‘0’, the output path of the Pin Widget is shut off.
5 Read Only 0b
Input Enable (INE): Set to ‘0’ since there is no
input path associated with the pin widget.
4:3 Read Only 00b Reserved
2:0 Read Only 000b
VREF Enable (VREFE): The Pin Widget does
not support VREF generation as indicated in the
Pin Capabilities. As such, this field should always
be “000b” to select the Hi-Z state.
Bits [31:28] Bits [27:20] Bits [19:8] Bits [7:0]
CAd = X Node ID = 0Ah Verb ID = F08h Payload = 00h
Bits [31:28] Bits [27:20] Bits [19:8] Bits [7:0]
CAd = X Node ID = 0Ah Verb ID = 708h Payload = xxh
Bits Type Default Description
31:8 Read Only 000000h Reserved
7 Read/Write 0b
Enable: Controls the actual generation of Unso-
licited Responses. 1 is enable; 0 is disable.
6 Read Only 0b Reserved
5:0 Read/Write 000000b
Tag: Is a 6 bit value assigned and used by soft-
ware to determine what codec node generated
the unsolicited response. The value programmed
into the Tag field is returned in the top 6 bits
(31:26) of every Unsolicited Response gener-
ated by this node.
Bits [31:26] Bits [25:0]
Tag Response