Norgren 200 Series Nugget Spool Valves - Manual (Page 18)

VAL-10-18 Littleton, CO USA Phone: 303-794-2611 www.norgren.com
Nugget 200 Spool Valves
● Long lasting spool design
● High flow compact valves
● Wide range of Air Pilot Operators available
● Three functional types available in 3/2, 5/2, and
5/3 configurations
1/4", 3/8", and 1/2" Air Pilot Actuated
3/2, 5/2, & 5/3 Inline and Stacking Valves
Technical Data
Medium:
Filtered and lubricated or non-lubricated compressed air or vacuum.
Operation:
Spool valve air pilot actuated.
Mounting:
Stacking – through holes on manifold subbase.
Inline – through holes in valve body.
Port Size:
1/4", 3/8", or 1/2" PTF, or 1/4" or 3/8" ISO G
Operating Pressure:
Maximum 150 psig (10.3 bar). For details see overleaf.
Operating Temperature:
-20°F to 160°F (-29°C to 71°C).
Consult Technical Service for use below +2°C (36°F).
Materials
Body: Aluminum
Spool: Anodized aluminum
Elastomers: Nitrile and special nitrile-based low-friction elastomers.
Ordering Information
To order standard Nugget 200 air pilot operated
valves, quote model number from tables overleaf,
e.g. order: K71DA00-KS6-KA2 for a 5-port/2-
position, single Air Pilot Operated, Spring Return
model.
Seal Compatibility
Nugget 200 seals are compatible with the following
lubricants:
DC BR-2+ grease (Dow Corning)
DC 44 grease (Dow Corning)
Nondetergent mineral based oil such as Mobil DTE
light oil
Nugget 200 seals are not compatible with WD-40 or
commonly used de-icer fluids. Consult factory to
verify compatibility of lubricants or fluids not listed
above.