Norgren 200 Series Nugget Spool Valves - Manual (Page 3)

Nugget 200 Spool Valves
Littleton, CO USA Phone: 303-794-2611 www.norgren.com VAL-10-3
High Flow Pilot Exhaust Orifice
Oversize pilot exhaust orifice provides rapid
return time when valve is deactuated.
Solenoid Diffuser Plug
A diffuser plug is factory installed in every
solenoid pilot exhaust to help prevent entry of
contaminants during shipping and normal
operation. It may be removed when minimum
response times are desired.
Electrical Connector Options
A cable grip connector with indicator light; a
1/2" NPT conduit connector; and a 5-foot,
three-conductor, molded cable with or without
indicator light, surge protection and reverse
voltage protection are available.
Aesthetic Appearance
Norgren's high luster black powder paint gives any control circuit
installation the quality appearance reflecting the superior
operating capacity built into every Nugget 200 valve.
Low Watt Solenoid Options
The 120 VAC and 24 VAC solenoid operator options require only
3.5-watts of power and the 115 VDC operator requires 3.4 watts.
All other DC operators require only 2 watts of power, ideal for
computer based control systems as well as industrial applications
where minimum energy consumption is desired.
Rotatable Connector and Coil
The standard cable grip electrical connector can be rotated 180°,
the solenoid coil can be turned in increments of 90°, and the
solenoid operator housing can be turned in increments of 180°
making the operators adaptable for easy installation.
Electrical Connector Options
A cable grip connector with indicator light; a 1/2" NPT conduit
connector; and a 5-foot, three-conductor, molded cable with or
without indicator light, surge protection and reverse voltage
protection are available.
Solenoid Manual Overrides
Standard solenoid operators are furnished with locking manual
overrides to provide a means of shifting the valve without electrical
power. Optional solenoids without overrides and with nonlocking
overrides are available.
CSA Certified Valves
Completed inline and stacking valve assemblies with certain
operators are CSA Certified. Stacking valves with junction box and
indicator light are CSA Component Certified.
Internal or External Solenoid Pilot Supply
All solenoid operated valves can be quickly converted from an
internal to an external pilot supply by interchanging the positions
of two interface seals and removing the external supply port pipe
plug.
Low Pressure Air Operator on
Inline Valve
Manual Lever Operator