Using the wireless features of your photo printer, Printing from a bluetooth, Wireless technology enabled device – Kodak 500 User Manual
Page 33
www.kodak.com/go/support
27
5
Using the wireless features of
your photo printer
Printing from a Bluetooth
®
wireless technology
enabled device
The on-board Bluetooth radio uses Bluetooth 1.1 technology, allowing you to print
from compatible Bluetooth technology enabled devices, including many personal
digital assistants (PDAs) and wireless mobile telephones. Use your wireless device to
review pictures, choose printing options, and print.
NOTE: The EasyShare photo printer 500 supports OPP (Object Push) and FTP (File Transfer) profiles only.
Check your Bluetooth technology enabled device specifications (or contact the manufacturer) to see
what profiles are supported by your device.
By default, the on-board Bluetooth radio is on and ready to receive signals from a
compatible Bluetooth technology enabled device.
To turn the Bluetooth radio off:
■
Press the Bluetooth button. Press again to turn it
on.
To turn the Bluetooth radio default to always off:
■
Press and hold the Bluetooth button for 5 seconds.
Repeat to turn the default to always on.
NOTE: You must be within 30 ft (10 m) or less of the photo printer for the wireless signal to be received.