Additional care and maintenance, Warranty, Limited warranty – Kodak 500 User Manual
Page 61: Additional care and maintenance warranty
Appendix
www.kodak.com/go/support
55
Additional care and maintenance
■
Do not allow chemicals, such as suntan lotion, to come into contact with the
painted surface of the photo printer.
■
If the photo printer has been subjected to inclement weather or you suspect water
has gotten inside the photo printer, turn off the photo printer and remove the
paper tray and color cartridge. Allow all components to air-dry for at least 24 hours
before using the photo printer again. If this does not resolve the problem, contact
customer support (see
■
Connect a tripod directly to the camera; do not connect a tripod to the printer.
■
Service agreements are available in some countries. Contact a dealer of Kodak
products for more information.
■
The photo printer and the AC power adapter contain a small amount of lead in the
circuit board. Disposal of this material may be regulated due to environmental
considerations.
Disposal of the color cartridge is not regulated and should not be subject to state
or local landfill, incineration, or recycling requirements.
For more disposal or recycling information, contact your local authorities. In the
US, visit the Electronics Industry Alliance Web site at
.
Warranty
Limited warranty
Kodak warrants this product to be free from malfunctions and defects in both
materials and workmanship for one year from the date of purchase.
Retain the original dated sales receipt. Proof of the date of purchase will be required
with any request for warranty repair.