Kodak 500 - Manual (Page 52)

46 www.kodak.com/go/support
Troubleshooting
Light glows
steady red The paper tray is empty. Load paper ( page 5 ), then press .
The paper tray is not installed or is
improperly installed. Remove the paper tray, check that
paper is properly loaded, and
re-install (
page 6 ). Press to
resume printing.
Paper did not feed; removable tabs may
be missing or sheets may be stuck
together (
page 36 ).
Check the paper supply. Reload
with new paper if necessary, then
press .
The paper feed roller may be dirty. Clean the paper feed roller
(
page 34 ).
Bluetooth button/light
Light status Cause Action/solution
Light glows
steady blue The Bluetooth radio is on; the
photo printer is ready to receive
Bluetooth signals. None required.
To turn the Bluetooth radio on or off,
press the Bluetooth button.
Light is off The Bluetooth radio is off; the
photo printer is unable to receive
Bluetooth signals.
Transfer button/light
Light status Cause Action/solution
Light glows steady
green The photo printer is ready for
transferring pictures. None required.
Paper light
Light status Cause Action/solution