Wireless network connection, Status lights, Wireless network connection status lights – Kodak 500 User Manual
Page 49
Troubleshooting
www.kodak.com/go/support
43
Wireless network connection
Status lights
Problem
Cause and/or solution
Photo printer cannot
connect to the network
■
A Kodak Wi-Fi card is not inserted or is not fully inserted. Reinsert
the Wi-Fi card (
■
Check the power connections.
■
Make sure the wireless router and network are running before
the photo printer begins scanning for a network.
■
Out of range of the Wi-Fi signal. Make sure the photo printer is
located within the operating range of the Wi-Fi wireless network.
■
The photo printer network settings are incorrect. Using the Wi-Fi
wireless configuration utility on your computer, change the
settings to match those of the network.
See the Wi-Fi wireless configuration utility Help for details.
■
There is interference in the wireless signal (such as a microwave
oven). Wait until there is no interference, then try again.
Print button/light
Light status
Cause
Action/solution
Light glows steady
green
The photo printer is ready for
printing.
None required.
Light blinks green
The photo printer is printing.