Kodak ESP 7 - Manual (Page 104)

Product Safety Specifications
96 www.kodak.com/go/aiosupport
Safety Specifications
• Read and follow these cautions and warnings before using Kodak products.
• Always follow basic safety procedures.
• Follow all warnings and instructions marked on the Kodak All-in-One printer.
Parts
CAUTION:
Do not disassemble this product; there are no user-serviceable part(s) inside.
Refer servicing to Kodak’s qualified service personnel.
Power
CAUTION:
If the power cord or plug is frayed or damaged, the equipment gets wet, or the
equipment does not operate normally when the operating instructions are
followed, unplug your printer from the power outlet and have qualified service
personnel service your printer.
CAUTION:
The alternating current (AC) adapter power supply is equipped with a
three-wire grounding type plug. If you cannot insert the plug into the power
outlet, contact an electrician to check or replace the power outlet.
CAUTION:
For added protection from damage during a lightning storm, or when your
printer and its associated alternating current (AC) adapter are unused for
long periods of time, unplug the AC adapter from the power outlet.
CAUTION:
Do not plug the alternating current (AC) adapter into a household extension
cord.
WARNING: Keep out of reach of children. Ink may be harmful if swallowed.
WARNING: Pushing objects through the equipment openings can result in an
electric shock or fire.
WARNING: The use of an accessory not recommended by Kodak could cause
fire, an electric shock, or injury.