Kodak ESP 7 - Manual (Page 43)

www.kodak.com/go/aiosupport 35
KODAK ESP 7 All-in-One Printer
Loading envelopes
CAUTION:
Do not load envelopes with cutouts or cellophane windows in this printer.
NOTE: Review Things to keep in mind, page 32 .
1. Remove all other paper from the paper tray you plan to use.
2. Place one or more envelopes along the right edge of the paper tray, with the
front side down and the envelope flaps pointing toward the left side of the tray.
3. Squeeze the paper edge guide and move it to the right until it just touches the
loaded envelope(s).
4. Close the paper tray and lower the paper output tray.
Loading legal size paper
1. Remove all other paper from the bottom tray.
2. Press and hold the paper tray extension-release, located on the inside of the
front of the bottom paper tray.
3. Pull the tray extension toward you gently until it stops moving easily. DO NOT
pull the extension far enough to disengage from the paper tray.
4. Let go of the tray release and then load the paper in the tray.
5. Squeeze the paper edge guide and move it to the right until it just touches the
loaded paper.
6. Squeeze the paper edge guide and move it towards the printer until it just
touches the loaded paper.
7. Push the paper tray in towards the printer.