Lenovo ThinkVantage Rescue and Recovery 4.3 (Deployment Guide) - Manual (Page 27)

Table 9. General settings
Setting
Windows control file
keyword
Description
Name FullName= Sets the user name for the
computer.
Organization OrgName= Sets the organization the
computer belongs to, such as
a specific department or
location.
Time zone TimeZone= Sets the time zone for the
computer.
The Network settings table provides the settings used to assign the computer
name, administrator password and the workgroup or domain of the destination
computer:
Table 10. Network settings
Setting
Windows control file
keyword
Description
Computer name ComputerName= Sets the name for the
computer.
Administrator password AdminPassword= Sets the administrator
password.
Encrypted administrator
password EncryptedAdminPassword= Sets the encrypted
administrator password.
Workgroup JoinWorkgroup= Sets the workgroup for the
computer.
Domain JoinDomain= Sets the domain for the
computer.
Domain administrator DomainAdmin= Sets the domain
administrator for the
computer.
Domain administrator
password DomainAdminPassword= Sets the domain
administrator password for
the computer.
Advanced settings are used to define one or more commands that can be run the
first time a user logs on to his or her system.
Command line interface: The following executable supports a command line
interface for the Base Software Administrator program and is supported under
WinPE and the Windows environment:
TBSADMIN.EXE [/DEPLOY [/SILENT] [/BOOTSP=YES|NO]
[/MANIFEST="<path>"] [/PERSONALIZATION="<path>"]]
The following table provides the switches for the Base Software Administrator
program.
Table 11. Switches
Switch Description
/DEPLOY Required to trigger a deploy. If /BOOTSP,
/MAN or /PER is also specified, the deploy
wizard is not displayed.
Chapter 3. Configurations 19