Appendix a. administrative tools, Command line support, Mailman – Lenovo ThinkVantage Rescue and Recovery 4.3 (Deployment Guide) User Manual
Page 69: Awizard.exe, Setpassword, Reloadsched, Rrcmd command-line interface
Appendix A. Administrative tools
ThinkVantage technologies offers tools that can be implemented by corporate IT
administrators. These tools can be downloaded from the Lenovo Web site at:
Command line support
The following sections provide command line support for the Rescue and Recovery
program in addition to Antidote Delivery Manager.
Mailman
Antidote Delivery Manager uses the command C:\Program Files\Lenovo\Rescue
and Recovery\ADM\mailman.exe. This procedure will check the Antidote
repository for tasks to be run. There are no command-line arguments.
AWizard.exe
The Antidote wizard executable (AWizard.exe) is located where the administrator
installs it. There are no command-line arguments.
SETPASSWORD
The SETPASSWORD command sets the user password. For a discussion about
passwords, see “Passwords” on page 48.
RELOADSCHED
This command reloads the scheduled settings that are defined in the registry. If
you make changes to the registry for scheduling, you must run this command to
activate the changes.
Example:
C:\Program Files\Common Files\Lenovo\Scheduler
RRCMD command-line interface
The primary Rescue and Recovery command-line interface is RRCMD. The
command is located in the C:\Program Files\Lenovo\Rescue and Recovery\
subdirectory. The following table provides information to use the command-line
interface for the Rescue and Recovery program:
Syntax:
RRcmd <command> <location=x> [<uuid=abc> | <index=x>] [level=x]<silent>
Table 23. RRcmd parameters
Command
Result
Backup
Initiate a normal backup operation (must include location and
name parameters).
Restore
Initiate a normal restore operation (must include location and
level).
© Copyright Lenovo 2008, 2009
61