Lenovo ThinkVantage Rescue and Recovery 4.3 (Deployment Guide) - Manual (Page 43)

Note: xx in the file name represents one of the following two-letter language
abbreviations:
Table 16. Language codes
Two-letter language code Language
br
dk
en
fi
fr
gr
it
jp
kr
nl
no
po
sc
sp
sv
tc Brazilian Portuguese
Danish
English
Finnish
French
German
Italian
Japanese
Korean
Dutch
Norwegian
Portuguese
Simplified Chinese
Spanish
Swedish
Traditional Chinese
Getting the file pdaguien.ini from the Rescue and Recovery environment
1.
Create getlist.txt file with the following parameters:
\preboot\usrintfc\pdaguien.ini
2. Save the file as c:\temp\getlist.txt.
3. At a command prompt, type the following command:
c:\RRUTIL-g c:\temp\getlist.txt c:\temp
Putting the file pdaguien.ini back into the Rescue and Recovery environment
From a command line, issue the following command:
C:\RRUTIL.EXE -p c:\temp
Note: The PUT (-p) routine uses the directory structure created in the GET (-g)
routine. For proper placement of the edited file, ensure that the edited file is
located in the same directory as the getlist.txt file, as follows:
c:\temp\preboot\usrintfc\pdaguien.ini
Example 1: Adding device drivers (such as ethernet) to the
Predesktop Area
The following example provides instruction on adding device drivers to the
Predesktop Area
1.
Obtain device drivers from the vendor’s Web site or other media.
2. Create the following directory structures:
C:\TEMP\MININT\INF
C:\TEMP\MININT\SYSTEM32\DRIVERS
3. Copy all network driver *.inf files to the \MININT\INF directory. (For
example, E100B325.inf needs to be in the \MININT\INF directory.)
4. Copy all *.sys files to the \MININT\SYSTEM32\DRIVERS directory. (For
example, E100B325.sys needs to be in \MININT\SYSTEM32\DRIVERS
directory.)
5. Copy any related *.dll, *.exe, or other files to the \MININT\SYSTEM32\
DRIVERS directory. (For example, the E100B325.din or INTELNIC.dll files must
be in the \MININT\SYSTEM32\DRIVERS directory.)
Chapter 3. Configurations 35