Document Outline

• Contents
• Safety
• Chapter 1. Introduction
  • Notices and statements in this document
  • Related documentation
• Chapter 2. Server setup roadmap
• Chapter 3. What is included with your server
  • Features and technologies
  • Specifications
  • Software
    • EasyStartup
    • EasyManage
  • Reliability, availability, and serviceability
• Chapter 4. Server controls, LEDs, and power
  • Front view
  • Operator information panel
  • EasyLED diagnostic panel
  • Rear view
  • System-board internal connectors
  • System-board external connectors
  • System-board option connectors
  • System-board switches and jumpers
  • System-board LEDs
  • Optional one-slot PCI extender card
  • Optional two-slot PCI extender card
  • Server power features
    • Turning on the server
    • Turning off the server
• Chapter 5. Installing optional devices and replacing customer replaceable units
  • Installation guidelines
    • System reliability guidelines
    • Working inside the server with the power on
    • Handling static-sensitive devices
  • Major components of the server
  • Opening the bezel
  • Opening and closing the bezel media door
  • Removing the side cover
  • Removing the air baffle
  • Removing the fan cage assembly
  • Installing the fan cage assembly
  • Removing the front USB connector assembly
  • Installing the front USB connector assembly
  • Removing the rear adapter-retention bracket
  • Installing the rear adapter retention bracket
  • Removing the front adapter-retention bracket
  • Installing the front adapter-retention bracket
  • Removing the battery
  • Installing the battery
  • Removing and installing drives
    • Removing a DVD drive
    • Installing a DVD drive
    • Removing an optional tape drive
    • Installing an optional tape drive
    • Removing a 2.5-inch hot-swap hard disk drive
    • Installing a 2.5-inch hot-swap hard disk drive
    • Removing a 3.5-inch hot-swap hard disk drive
    • Installing a 3.5-inch hot-swap hard disk drive
    • Removing a simple-swap hard disk drive
    • Installing a simple-swap hard disk drive
    • IDs for hot-swap hard disk drives
    • Power and signal cables for internal drives
  • Removing a power supply
  • Installing a power supply
  • Removing a hot-swap fan
  • Installing a hot-swap fan
  • Removing a memory module
  • Installing a memory module
  • Removing an adapter
  • Installing an adapter
  • Installing a second microprocessor
  • Removing a ServeRAID-BR10i SAS/SATA controller
  • Installing the ServeRAID-BR10i SAS/SATA controller
  • Removing an optional ServeRAID-MR10i SAS/SATA controller
  • Installing the optional ServeRAID-MR10i SAS/SATA controller
  • Removing an optional ServeRAID-MR10is VAULT SAS/SATA controller
  • Installing the optional ServeRAID-MR10is VAULT SAS/SATA controller
  • Removing the virtual media key
  • Installing the virtual media key
  • Removing the control-panel assembly
  • Installing the control-panel assembly
  • Completing the installation
    • Closing the bezel
    • Installing the air baffle
    • Installing the side cover
    • Connecting the cables
    • Updating the server configuration
  • Connecting external devices
• Chapter 6. Configuring the server
  • Using the Setup Utility
    • Starting the Setup Utility
    • Setup Utility menu choices
    • Passwords
      • Power-on password
      • Administrator password
  • Configuring RAID controllers
    • Using the LSI Configuration Utility program
      • Starting the LSI Configuration Utility program
      • Formatting a hard disk drive
      • Creating a RAID array of hard disk drives
  • Using the WebBIOS utility
    • Starting the WebBIOS utility
    • Main menu of the WebBIOS utility
    • Creating a storage configuration using the Configuration Wizard
    • Viewing and changing properties
    • Viewing and changing virtual disk properties
  • Using the EasyStartup DVD
    • Before you use the EasyStartup DVD
    • Configuring RAID
    • EasyStartup overview
      • Setup and configuration
      • Typical operating-system installation
    • Installing your operating system without using EasyStartup
  • Using the Boot Manager program
  • Enabling the Broadcom Gigabit Ethernet Utility program
  • Configuring the Broadcom Gigabit Ethernet controller
  • Updating the firmware
    • Starting the backup server firmware
    • Recovering the server firmware
  • Automated boot recovery (ABR)
  • Three boot failure
  • Using the integrated management module
  • Using the remote presence capability and blue-screen capture
    • Enabling the remote presence feature
    • Obtaining the IP address for the IMM
    • Logging on to the Web interface
  • Diagnostics programs and messages
    • Running the diagnostics programs
  • Advanced Settings Utility program
  • Installing EasyManage software
    • Installation requirements
    • Installation order
    • Installing Windows 2003 components on the Core Server
    • Installing Windows 2008 32-bit components
      • Installing Web Server Role (IIS)
      • Installing Microsoft SNMP services
    • Uninstalling the LANDesk Software Agent
• Chapter 7. Troubleshooting
  • Troubleshooting tables
    • CD or DVD drive problems
    • Diskette drive problems
    • General problems
    • Hard disk drive problems
    • Intermittent problems
    • Keyboard, mouse, or pointing-device problems
    • Memory problems
    • Microprocessor problems
    • Monitor or video problems
    • Optional-device problems
    • Power problems
    • Serial port problems
    • Software problems
    • Universal Serial Bus (USB) port problems
  • Solving undetermined problems
  • Solving SCSI problems
  • Solving power problems
  • Solving Ethernet controller problems
  • POST
    • Event logs
      • Viewing event logs from the Setup Utility
      • Viewing event logs without restarting the server
      • Clearing the event logs
    • POST error codes
• Appendix A. Getting help and technical assistance
  • Before you call
  • Using the documentation
  • Getting help and information from the World Wide Web
  • Calling for service
  • Using other services
  • Purchasing additional services
  • Lenovo product service
• Appendix B. Notices
  • Trademarks
  • Important notes
  • Product recycling and disposal
  • Compliance with Republic of Turkey Directive on the Restriction of Hazardous Substances
  • Recycling statements for Japan
  • Battery return program
  • German Ordinance for Work gloss statement
  • Electronic emission notices
    • Federal Communications Commission (FCC) statement
    • Industry Canada Class A emission compliance statement
    • Avis de conformité à la réglementation d′Industrie Canada
    • Australia and New Zealand Class A statement
    • United Kingdom telecommunications safety requirement
    • European Union EMC Directive conformance statement
    • Germany Class A compliance statement
    • Japanese Voluntary Control Council for Interference (VCCI) statement
    • Taiwan Class A warning statement
    • People's Republic of China Class A warning statement
    • Korea Class A warning statement
• Index
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • R
  • S
  • T
  • U
  • V
  • W