Front view of the storage array, Rear view of the storage array – Lenovo ThinkServer Storage SA120 User Manual
Page 22
Front view of the storage array
The following illustration shows the front view of the storage array.
Note: Depending on the model, your storage array might look slightly different from the following illustration.
Figure 3. Front view of the storage array
1
Ear cap (left)
2
3.5-inch drive bay (bay 0)
3
3.5-inch drive bay (bay 1)
4
3.5-inch drive bay (bay 2)
5
3.5-inch drive bay (bay 3)
6
3.5-inch drive bay (bay 4)
7
3.5-inch drive bay (bay 5)
8
3.5-inch drive bay (bay 6)
9
3.5-inch drive bay (bay 7)
10
3.5-inch drive bay (bay 8)
11
3.5-inch drive bay (bay 9)
12
3.5-inch drive bay (bay 10)
13
3.5-inch drive bay (bay 11)
14
Ear cap (right)
1
Ear cap (left)
14
Ear cap (right)
2
–
13
3.5-inch drive bays (bays 0–11)
You can install up to twelve 3.5-inch hot-swap SAS hard disk drives into the 3.5-inch drive bays in the front
of the storage array. To install 2.5-inch hot-swap SATA solid-state drives, see “Rear view of the storage
array” on page 10.
Rear view of the storage array
This topic provides information to help you locate the connectors and components on the rear of your
storage array.
10
ThinkServer Storage SA120 User Guide and Hardware Maintenance Manual