Lenovo ThinkServer Storage SA120 - Manual (Page 63)

7. Position the new backplane so that the screw holes in the new backplane are aligned with the
corresponding holes in the chassis. Then, install the screws to secure the new backplane to the chassis.
Note: Use a screw driver with a long handle to install the screws 1 to the bottom of the chassis.
Figure 39. Installing the backplane
8. Reinstall the components that were removed. See the related topics in Chapter 6 “Installing, removing,
or replacing hardware” on page 31.
Chapter 6 . Installing, removing, or replacing hardware 51