Cru identification – Lenovo ThinkServer Storage SA120 User Manual

Page 26

Advertising
background image

CRU identification

Customer Replaceable Units (CRUs) are parts that can be upgraded or replaced by the customer. If a CRU is
determined to be defective during the warranty period, a replacement CRU will be provided to the customer.
Customers are responsible for installing the self-service CRUs for this product. Customers also can install
optional-service CRUs, which might require some technical skills or tools, or request that a technician install
the optional-service CRU under the terms of the applicable warranty service type for your country or region.

Non-CRUs must be replaced only by trained service technicians.

The following table lists the major Field Replacement Units (FRUs) in your storage array and the CRU
identification information. For a complete listing of FRU information, such as FRU part numbers and
supported storage array models, go to:
http:/www.lenovo.com/serviceparts-lookup

Notes:

• Before servicing a Lenovo product, ensure that you read and understand “Safety information” on page iii.

• Use only parts provided by Lenovo.

Description

Self-service CRU

Optional-service CRU

Dummy drive tray (in some models)

Yes

No

Power supply shield (in some models)

Yes

No

Fan assembly

Yes

No

Hard disk drive or solid-state drive (in some models)

Yes

No

Drive tray

Yes

No

Backplane

No

No

Power supply

Yes

No

Rear I/O module

Yes

No

2.5-inch drive cage (SATA-to-SAS) (available as an
option)

Yes

No

Mini SAS cables

Yes

No

14

ThinkServer Storage SA120 User Guide and Hardware Maintenance Manual

Advertising