Lenovo ThinkStation D20 - Manual (Page 25)

6. Slide the diskette drive or card reader into the drive bay until it snaps into position. See “Locating
components” on page 7.
Figure 14. Installing a new diskette drive or card reader
7. Connect the diskette drive to the diskette drive connector on the system board. If you are installing a
card reader, connect it to the card reader connector on the system board. See “Identifying parts on
the system board” on page 8.
8. Reinstall the front bezel.
What to do next:
• To work with another option, go to the appropriate section.
• To complete the installation, go to Chapter 4 “Completing the parts replacement” on page 45.
Installing a hard disk drive in bay 5
This section provides instructions on how to install a hard disk drive.
Note: You can install a combination of SATA and SAS hard disk drives within the same computer. However,
SATA and SAS hard disk drives cannot be installed within the same RAID array.
To install a new hard disk drive:
1. Remove the computer cover. See “Removing the computer cover” on page 11.
2. Locate one of the empty hard disk drive slots in bay 5. See “Locating components” on page 7. Each
empty hard disk drive slot has a spare bracket.
3. Pull the handle to remove a spare bracket.
Chapter 3 . Installing options and replacing hardware 19