Replacing the heat sink and fan assembly, Pressing the latch and removing the adapter card – Lenovo ThinkStation D20 User Manual
Page 37
Figure 32. Pressing the latch and removing the adapter card
Note: The adapter card fits tightly into the card slot. If necessary, alternate moving each side of the
adapter card a small amount until it is removed from the adapter card slot.
6. To install an adapter card, see “Installing adapter cards” on page 28.
7. Go to Chapter 4 “Completing the parts replacement” on page 45.
Replacing the heat sink and fan assembly
Attention: Do not open your computer or attempt any repair before reading and understanding the “Important safety
information” in the ThinkStation Safety and Warranty Guide that came with your computer. To obtain a copy of the
ThinkStation Safety and Warranty Guide, go to:
CAUTION:
The heat sink and fan assembly might be very hot. Turn off the computer and wait three to five
minutes to let the computer cool before removing the computer cover.
This section provides instructions on how to replace the heat sink and fan assembly.
To replace the heat sink and fan assembly:
Chapter 3
.
Installing options and replacing hardware
31