Lenovo ThinkServer RD540 - Manual (Page 22)

8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter Page 4
Converged Network Adapter SuperInstaller Installation
QLogic Windows SuperInstaller
For information about the QLogic Windows SuperInstaller, refer to the QLogic Windows SuperInstaller
Readme file on the QLogic Web site (http://driverdownloads.qlogic.com).
QLogic Linux SuperInstaller
For information about the QLogic Linux SuperInstaller, refer to the QLogic Linux SuperInstaller Readme
file on the QLogic Web site (http://driverdownloads.qlogic.com).
Multi-boot Image for 10Gb Converged Network Adapter—CNA
Function Configuration Utility
This section contains the following information:
• “Operating System Support” on page 4
• “Multi-boot Package Contents” on page 5
• “Converged Network Adapter Function Configuration Package Contents” on page 5
• “Using QLflash” on page 5
— “Updating the Multi-boot Code” on page 5
— “QLflash Command Line Options” on page 5
— “Adapter Configuration Utility” on page 6
Operating System Support
This multi-boot code supports DOS, Windows Server ® 2008; Solaris x86; and Linux on IA32, AMD64, and
Intel ® x64-based systems. For information about the multi-boot image for your operating system, refer to
the corresponding Readme file on the QLogic Web site (http://driverdownloads.qlogic.com).
b Use the following formulas to calculate the maximum operating temperature (in °C) for a specific altitude. Use the first formula if the altitude is stated in
meters and the second formula if the altitude is stated in feet.
c Use the following formulas to calculate the maximum operating temperature (in °F) for a specific altitude. Use the first formula if the altitude is stated in
meters and the second formula if the altitude is stated in feet.
d Maximum corrosive contaminant levels measured at =50% relative humidity; see Table 3 in ISA-71.04-1985.