Lenovo ThinkServer RD540 - Manual (Page 96)

8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter Page 78
Table 14 lists miscellaneous Windows diagnostics commands.
Table 15 lists the Windows CLI diagnostic test commands. Note that while running these tests, network
traffic is interrupted.
Table 14. Windows QConvergeConsole CLI—Miscellaneous Commands
Command Description
qaucli -v Print version number, and then exit
qaucli -h Print usage, and then exit
Table 15. Windows QConvergeConsole CLI—Diagnostic Test Commands
Command Description
-i
--interface
Specifies the interface type (NX_NIC, NX_NIC1,
and so on)
-a
--all
Perform all tests, regardless of default
-D
--default
Perform only the default test
-R
--CRegs
Test all control registers (default)
-I
--IRQS
Test interrupt mechanism (default)
-L
--IntLB
Internal loopback test (default)
-H
--Hw
Hardware test (default)
-S
--LinkST
Link status test (default)
-nR
--noCRegs
No control registers test (combine –D or –a)
-nl
--noIRQS
No interrupt test (combine –D or –a)
-nL
--noIntLP
No internal loopback test (combine –D or –a)
-nH
--noHw
No hardware test (combine –D or –a)
-nS
--noLinkSt
No link status test (combine –D or –a)
-h
--help
View help text