Lenovo ThinkServer RD540 - Manual (Page 94)

8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter Page 76
3. On the adapter properties page, click the Diagnostics tab. Figure 49 shows the Diagnostics page.
Figure 49: Diagnostics Tests on Windows
4. Under Diagnostic Tests, select one or more check boxes indicating the tests you want to run:
Hardware Test, Register Test, Interrupt Test, Loopback Test, and Link Test. (“Windows Diagnostic
Test Descriptions” on page 79 describes each test type.)
5. Click Run Tests.
Note: Only one test can run at a time. Multiple tests can run sequentially.