Lenovo ThinkServer RD540 - Manual (Page 49)

8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter Page 31
— Use default MAC Address—Select this check box to have the driver assign a MAC address, or
clear the check box to select a locally-administered MAC address from the list.
— Select Preferred Primary Adapter—Choose a preferred primary adapter for the team from the list
of teamed adapters, or None to allow the driver to assign the preferred primary adapter.
— Failback Type—If this is a Failsafe Team, select a failback type of None, Auto Select, or
Preferred Primary.
— Load Balancing Type—If this is an 802.3ad Static Team or 802.3ad Dynamic Team, select the type
of load balancing: Auto, MAC Address Based, or None.
— Distribution Type—If this is a Switch Independent Load Balancing team type, select a distribution
type of either Auto Select or MAC Address Based.
— Advanced—Click this button to configure QLogic-specific team capabilities such as RSS, MTU, or
various offloads. These properties configure the member adapters to avoid any conflict after a team
has been created.
Figures 9 through 12 show the configuration of various teaming modes.
Figure 9: Creating a Failsafe Team