Lenovo ThinkServer RD540 - Manual (Page 55)

8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter Page 37
3. At least two adapters must be present in a team. If an adapter is no longer required to be a member of
a team, it can be removed from the team.
To change a team property:
1. On the Team Management page, in the right pane under Team Data, expand the Properties list.
2. Double-click the team property you need to change.
3. In the Advanced Team Properties dialog box (Figure 15), specify a new property value, and then click
OK.
Figure 15: Modifying Advanced Team Properties
The team properties change takes effect immediately. Changing team properties causes the driver to
reload, which could result in a momentary loss of connectivity.
Note: For the VLAN and teaming solution to work correctly, the properties of all teamed adapters
and adapters with multiple VLANs must remain synchronized with the team properties.
Ensure that you change the properties of a team and an adapter with VLANs only on the
Team Management page.
Note: To ensure that the properties of all teamed adapters and adapters with VLANs remain
synchronized with the team properties, do not directly modify the adapter properties on the
Advanced page. If an adapter property becomes out of sync with its team properties, change
either the team or adapter property so that they are the same on each, and then reload the
team. To reload a team: On the Team Management page, in the left pane under Teams and
Adapters, right-click the team name, and then click Reload Team.