Lenovo ThinkServer RD540 - Manual (Page 78)

8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter Page 60
d. At the prompt, enter the percent value of bandwidth you want committed to the selected function.
e. Enter the percent value of bandwidth to which you want to limit the selected function.
f. Specify whether you want the bandwidth settings to persist across reboots (Figure 39).
Figure 39: Setting Bandwidth Changes to Persist
6. Return to the NIC Partitioning <NPAR> Configuration Selection screen.
7. Change the personalities of each function to meet your system requirements. For example:
a. Select option 2: Change PCI Function Personality.
b. Select the port number, 1 or 2.
c. Select the function number. The command line displays a list of options with choices that apply to
the selected function number. This mode prevents you from assigning a function type that does not
apply to a given function number.
d. Set the personality type by selecting the option number that identifies the desired function type.
Depending on the function number and current state, this could be Disabled, NIC, FCoE, or
iSCSI
.
Note: For a list of NPAR configuration options, see “NPAR Setup” on page 69.