Lenovo IdeaCentre K210 - Manual (Page 22)

19
Hardware Replacement Guide
4. Ensure the adapter is fully seated into the adapter connector.
5. At the rear of the computer, pivot the adapter latch to the closed position to
secure the adapter.
6. Refer to the “Completing the installation”.
Note: Replacement of some models equipped with graphic
adapter bracket is different.
Please remove the bracket first as the following:
1. Remove the two screws that secure the bracket at the bottom of the chassis.
2. Lift the bracket out of the chassis.
3. Then remove the adapter as above.
31032753 IdeaCentre K_HRG_EN.indd 19 2007.12.10 3:53:25 PM