Replacing the mouse – Lenovo IdeaCentre K210 User Manual

Page 29

Advertising
background image

26

Hardware Replacement Guide

To replace the keyboard:

1. Remove any media (diskettes, CDs, or tapes) from the drives, shut down your

operating system, and turn off all attached devices and the computer.

2. Unplug all power cords from electrical outlets.
3. Locate the connector for the keyboard. Refer to “Locating connectors on the

rear of the computer” and “Locating connectors on the front of the computer”.

Note: Your keyboard might be connected to the standard keyboard connector

at the rear of the computer or to a USB connector at either the front or

rear of the computer.

4. Disconnect the failing keyboard cable from the computer and connect the new

keyboard cable to the same connector.

5. Refer to the “Completing the installation”.

Replacing the mouse

Attention

Do not remove the computer cover or attempt any repair before reading the
“Important safety information” in the Safety and Warranty Guide that was
included with your computer or in the Hardware Maintenance Manual (HMM)
for the computer. To obtain copies of the Safety and Warranty Guide or
HMM

, go to the Support Web site at http://www.lenovo.com/support.

To replace the mouse:

1. Remove any media (diskettes, CDs, or tapes) from the drives, shut down your

operating system, and turn off all attached devices and the computer.

2. Unplug all power cords from electrical outlets.
3. Locate the connector for the mouse. Refer to “Locating connectors on the

front of the computer” and “Locating connectors on the rear of the computer”.

Note: Your mouse might be connected to the standard mouse connector
at the rear of the computer or to a USB connector at either the front or rear
of the computer.

31032753 IdeaCentre K_HRG_EN.indd 26

2007.12.10 3:53:33 PM

Advertising