Lenovo IdeaCentre K210 - Manual (Page 27)

24
Hardware Replacement Guide
To replace the system fan assembly:
1. Remove the computer cover. Refer to “Removing the computer cover”.
2. Locate the system fan assembly. Refer to “Identifying parts on the system
board”.
3. Disconnect the system fan assembly cable from the system board. Refer to
“Identifying parts on the system board”.
4. Pull the system fan assembly out of chassis.
5. Install the new system fan assembly by aligning the rubber mounts of the
system fan assembly with the holes on the chassis and push the rubber
mounts through the holes.
31032753 IdeaCentre K_HRG_EN.indd 24 2007.12.10 3:53:30 PM