Lenovo IdeaCentre B520e - Manual (Page 22)

1. Start the Setup Utility program (see Starting the Setup Utility program on page 15).
2. Select Start Up.
3. Select Primary Boot Sequence, to select or change startup device sequence by pressing <+> or <-> key
to move the device up or down in the startup sequence. Press the <X> key to excludes or includes a
device to the boot sequence.
4. Press ESC to return to Exit and select Save changes and Exit.
If you have changed these settings and want to return to the default settings, select Load Optimal Defaults
on the Setup Utility menu.
Exiting from the Setup Utility program
When you finish viewing or changing settings, press Esc to return to the Setup Utility program menu (you
might have to press Esc several times). If you want to save the new settings, select Save changes and Exit
before you exit. Otherwise, your changes will not be saved.
16 IdeaCentre B520e Hardware Maintenance Manual