AT&T E2801 - Manual (Page 11)

8
Getting started
Installation options
1. To remove the bracket, hold the
telephone base in both hands, press
the two bracket tabs and lift the
bracket away from slots and .
2. Connect the telephone line cord and
power adapter to the jacks on the bot-
tom of the telephone base. Bundle the
telephone cord, and secure it with a
twist tie before placing it inside the
bracket.
Wall mounting
The telephone base comes with the bracket mounted for tabletop use. If wall
mounting is desired, a telephone outlet wall mounting plate with mounting studs is
required. This mounting plate with studs may be available for purchase from many
hardware or consumer electronics retailers and may require professional installation.
Tabletop mount Wall mount
Telephone outlet
mounting plate
with mounting
studs